DRM Technic -- Products -- ATEX Products


DRM Technic offers a range of ATEX certified products for use in hazardous areas. Our
range 
includes Sample Gas Pumps, Probes and Coolers. We are also working on our first ATEX
approved 
peristaltic drain pumps which will be ready before the end of the year.

Click for:
Sample Gas Probes | Sample Gas Coolers | Sample Gas Pumps 
Peristaltic Condensate Pumps | Pre-Separators | Automatic Condensate Drains
Dust Probes | Moisture Detectors / Controllers | Sample Lines

SAMPLE GAS PROBES




GAS 222.20 ATEX SAMPLE GAS PROBE
Sample Gas Probe for Zones 1, 2, 21 and 22 explosive areas. With
weather protection, a self-regulating heater, and integrated particle filter.
For applications with a low dust load. The filter can be replaced
without tools.
Datasheet

 




GAS 222.21 ATEX SAMPLE GAS PROBE
Sample Gas Probe for Zone 1, 2, 21 and 22 explosive areas. With
weather protection, an in-situ filter with blowback system, a temperature
self-regulating heater and integrated safety filter. For applications with
a high dust load. The filter can be replaced without tools.
Datasheet

 




GAS 222.31 ATEX SAMPLE GAS PROBE
Sample Gas Probe for Zone 1, 2, 21 and 22 explosive areas. With
weather protection, an in-situ filter with blowback system, a temperature
self-regulating heater. The blowback system can be automated. For
applications with a high dust load.
Datasheet

 




GAS 222.35 ATEX SAMPLE GAS PROBE
Sample Gas Probe for Zone 1, 2, 21 and 22 explosive areas. With
weather protection, an in-situ filter with blowback system, and a
temperature self-regulating heater. The blowback system can be
automated. For applications with high dust loads which are not prone to
fouling. The in-situ filter can be replaced without tools.
Datasheet

 

 

SAMPLE GAS COOLERS

EGK 1 Ex2 SAMPLE GAS COOLER
An ATEX and IECEx approved cooler suitable for operation in
explosive zones. Has up to two gas paths.
Datasheet

EGK 2A Ex SAMPLE GAS COOLER
ATEX and GOST approved compressor cooler for use in explosive
areas. Cooling block with two cavities for plug-in heat exchangers
and
up to four gas paths. Available with a 115 or 230 V AC power
supply.

Datasheet

TC-STANDARD X2 SAMPLE GAS COOLER
Many applications require equipment that can be used in explosive
areas. This is where the TC-Standard X2 series comes in, providing
solutions for Zone 2 and Class 1, Division 2 applications.
Datasheet

TC-STANDARD + X2 SAMPLE GAS COOLER
Many applications require equipment that can be used in explosive
areas. This is where the TC-Standard + X2 series comes in,
 providing
solutions for Zone 2 and Class 1, Division 2 applications.
It has an
optimised heat exchanger.
Datasheet

TC-MIDI X2 SAMPLE GAS COOLER
Many applications require equipment that can be used in explosive
areas. This is where the TC-Midi X2 series comes in, providing
solutions for Zone 2 and Class 1, Division 2 applications with higher
dew point than the TC-Standard range is suitable for.
Datasheet

TX-MIDI + X2 SAMPLE GAS COOLER
Many applications require equipment that can be used in explosive
areas. This is where the TC-Midi + X2 series comes in, providing
solutions for Zone 2 and Class 1, Division 2 applications with higher
dew point than the TC-Standard range is suitable for. It has new
generation heat exchangers and a low wash out effect.
Datasheet

TC-DOUBLE X2 SAMPLE GAS COOLER
Many applications require equipment that can be used in explosive
areas. This is where the TC-Standard X2 series comes in, providing
solutions for Zone 2 and Class 1, Division 2 applications. It has two
cooling systems and heat exchangers.
Datasheet


TC-DOUBLE + X2 SAMPLE GAS COOLER
Many applications require equipment that can be used in explosive
areas. This is where the TC-Standard X2 series comes in, providing
solutions for Zone 2 and Class 1, Division 2 applications. It has two
cooling systems and heat exchangers, new generation heat
exchangers and a low wash out effect.
Datasheet

 

SAMPLE GAS PUMPS



P1.3 SAMPLE GAS PUMP
Small, powerful Sample Gas Pumps for installation in analyser cabinets.
Suitable for ATEX and IECEx Zone 2. Flow rate: 280 L/h.
Datasheet




P2.2 ATEX SAMPLE GAS PUMP
A robust Sample Gas Pump, suitable for transporting moist and
flammable gases in ATEX areas. Flow rate: 400 L/h.
Datasheet




P2.4 ATEX SAMPLE GAS PUMP
A robust Sample Gas Pump with separate drives, suitable for
transporting moist sample gases in ATEX areas. Flow rate: 400 L/h.
Datasheet




P2.72 ATEX SAMPLE GAS PUMP
A robust Sample Gas Pump, suitable for transporting moist gases in
ATEX areas. Flow rate: 400 L/h.
Datasheet




P2.74 ATEX SAMPLE GAS PUMP
A robust Sample Gas Pump, suitable for transporting moist gases in
ATEX areas. Flow rate: 400 L/h.
Datasheet


 

PERISTALTIC CONDENSATE PUMPS



CPsingle/CPdouble ATEX PERISTALTIC CONDENSATE PUMPS
ATEX-certified variations on the CPsingle/CPdouble pumps, specified
for the removal of condensate in applications involving volatile of
explosive gases.
Datasheet




CPsingle/CPdouble X1 PERISTALTIC CONDENSATE PUMPS
Hazard Area Zone 1. Housing version. Available with single or double
 heads. Separate installation possible. Easy to replace hoses. Various
hose materials available, including ones suitable for demanding
applications. 115 / 230 V AC. Reliable build.
Datasheet




CPsingle/CPdouble X2 PERISTALTIC CONDENSATE PUMPS
Hazard Area Zone 2. Built-in and housing versions. Available with single
or double heads. Separate installation possible. Various flow rates. Easy
to replace hoses. Various hose materials available, including ones
suitable for demanding applications. 115 / 230 V AC. Reliable build.
Datasheet




DSR25-ATEX PERISTALTIC CONDENSATE PUMP
An ATEX version of the DSR25 Condensate Pump. It is reliable for
continuous applications, has no condensate flow back, has a long life,
and is completely self-suctioning.
Datasheet


 

PRE-SEPARATORS




11 LD SPEC. PRE-SEPARATOR
Vertically-mounted pre-cooler with an integrated automatic drain valve,
specified for use as an up-stream separator.

Datasheet



AK 20 V PRE-SEPARATOR
Vertically mounted pre-cooler, specified for use either as a separator or
a stand-alone condensate trap.

Datasheet

 

AUTOMATIC CONDENSATE DRAINS


AK 5 AUTOMATIC CONDENSATE DRAIN
Compact size condensate drain which removes condensate at
pressures of up to 2 bar and temperatures of up to 100°C.

Datasheet


AK 20 AUTOMATIC CONDENSATE DRAIN
Regular size condensate drain which removes condensate at
pressures of up to 2 bar and temperatures of up to 100°C.

Datasheet


11 LD V 38 AUTOMATIC CONDENSATE DRAIN
Heavy duty condensate drain which removes condensate at
pressures of up 18 bar and temperatures of up to 200°C.

Datasheet

  

DUST PROBES




BDA 02 Ex DUST PROBE
A version of the BDA 02 Dust Probe suitable for ATEX Applications.
Datasheet



 

 MOISTURE DETECTORS / CONTROLLERS


FF-3-N MOISTURE DETECTOR
PVDF, 1.4571/6, Epoxy and PTFE moisture detector, specified for applications in potentially explosive atmospheres.
Datasheet

   ER-145/A/Ex MOISTURE DETECTOR CONTROLLERS
Connectable to one FF-3-N. Comes with intrinsically safe input, long cables and LED indicators.
Datasheet

 

SAMPLE LINES




H300 SERIES SAMPLE LINES
A large series of sample lines, featuring controller-regulated,
self-regulated and ATEX versions, alongside a Temperature Controller.
Datasheet